MEPF EPC Contractor · Pune

Engineering for the Pune corridor. MEPF EPC across automotive, IT and pharma.

MEPF EPC contractor delivering Mechanical & HVAC, Electrical & ELV, Plumbing and Fire Protection for automotive, IT/ITES, pharmaceutical, defence and engineering projects across Pune, Chakan, Talegaon Dabhade, Hinjewadi, Ranjangaon and the PCMC industrial belt.

Why local context matters

The Pune industrial corridor is the densest automotive cluster in western India — Bajaj, Tata Motors, Mahindra, Volkswagen, Mercedes-Benz, Volvo and their ancillary network all sit within an hour of each other.

That gives every MEPF brief here a manufacturing character. A vehicle assembly plant in Chakan needs paint-shop ventilation engineered for ATEX zones, compressed air at 7 bar with controlled dewpoint, and HT distribution sized for sustained press-shop load. An IT campus in Hinjewadi needs UPS-backed lighting, BMS integration and addressable fire alarm interfacing with the campus security ecosystem. A pharma fill-finish line at Serum Institute’s campus needs classified cleanrooms and validated documentation for WHO cGMP audit.

Our Pune project teams travel from Ahmedabad on a defined site rhythm — project leads embedded during engineering coordination, commissioning engineers on-site for the testing campaign, and a Pune / PCMC-based AMC partner network for post-handover response. For Chakan, Ranjangaon and Hinjewadi briefs we can mobilise an engineer within 24 hours.

How we deliver in Pune

Project rhythm & reach

  • Embedded project leadsOn-site during engineering coordination, procurement and execution.
  • +91 92760 09000Direct line to engineering. Same response standards as our Ahmedabad projects.
  • [email protected]One working-day response, no auto-replies.
  • PCMC partner networkPune / PCMC-based AMC and emergency response partners for post-handover support.
The MEPF scope we deliver in Pune

Four disciplines. One accountable team.

Most clients in the Pune region award the full MEPF scope as one EPC contract — single point of accountability, no interface gaps between mechanical and fire, no finger-pointing at commissioning. Below is the scope at a glance; each discipline page goes deeper.

M

Mechanical & HVAC

Chillers, AHUs, cleanroom HVAC, industrial ventilation, process cooling, ASME B31.3 piping, compressed air and boilers. Explore mechanical scope →

E

Electrical & ELV

HT/MV switchgear, transformers, LT distribution, lighting, earthing, BMS, structured cabling, CCTV, access control. Explore electrical scope →

P

Plumbing

Domestic water, drainage, storm water, rainwater harvesting (IGBC), STP/ETP integration. Explore plumbing scope →

F

Fire Protection

Sprinklers (NFPA 13), hydrants (NFPA 14), fire pump rooms (NFPA 20), addressable detection (NFPA 72), clean-agent gas suppression. Explore fire scope →

Integrated MEPF installation — chiller plant, electrical panels and fire pump room
Pune MEPF EPC — engineering through AMC under one accountable contract
Where we work in and around Pune

Industrial clusters we deliver MEPF EPC for.

Pune’s industrial geography concentrates around four corridors — the Chakan-Talegaon automotive belt to the north, the Hinjewadi IT and Pirangut belt to the west, the Ranjangaon SEZ and engineering belt to the east, and the legacy Bhosari-PCMC industrial estate. We deliver MEPF EPC across all four.

Chakan MIDC
Talegaon Dabhade MIDC
Hinjewadi Phases 1, 2 & 3
Ranjangaon MIDC SEZ
Bhosari & PCMC industrial belt
Pirangut & Hingewadi
Khed City SEZ
Kharadi & Magarpatta
Statutory compliance in Pune

Codes & clearances the Pune MEPF brief actually has to satisfy.

Beyond the national codes (NBC, NFPA, ASME, IS), every Pune project sits under Maharashtra state and PMC / PCMC municipal compliance — the layered licences that decide whether the facility can actually energise and operate.

Maharashtra Fire Act, 2006

Maharashtra Fire Prevention and Life Safety Measures Act — the state framework for fire NOC, administered through the local fire brigade (PMC, PCMC, MIDC) with both construction and occupancy NOCs required.

MPCB consent

Maharashtra Pollution Control Board — consent to establish (CTE) and consent to operate (CTO) for STP / ETP, water discharge and air emission norms.

PMC / PCMC plumbing

Pune and Pimpri-Chinchwad Municipal Corporation plumbing regulations, stormwater connectivity, sewer line approval, MIDC water supply for industrial occupancies.

MSEDCL energisation

Maharashtra State Electricity Distribution Company — HT/LT load sanction, transformer specification, metering, statutory inspector approval before energisation.

Maharashtra CEIG

Chief Electrical Inspector to Government (Maharashtra) — statutory approval for HT switchyard, transformer, LT panels and earthing.

Maharashtra DISH & Factories Act

Directorate of Industrial Safety & Health — factory plan approval, boiler registration, pressure vessel certification, hazardous process notification, especially relevant for auto and chemical occupancies.

Sectors we deliver MEPF EPC for in Pune

The industrial base of greater Pune, mapped to our scope.

Pune’s industrial base is the most automotive-concentrated in western India — with the Hinjewadi IT corridor as a parallel cluster, a deep pharma footprint anchored by Serum Institute and Cipla, and a growing defence and engineering ecosystem around HAL, BEL and ARDE.

Automotive & Auto Ancillary
IT / ITES Campuses
Pharmaceutical & Biotech
Defence & Engineering
Hospitals & Healthcare
FMCG & Food Processing
Data Centres
Commercial & Corporate
Talk to us

An MEPF project in Pune to brief?

Send a short note — what you’re building, where in the Pune corridor, and when you need it commissioned. For Chakan, Ranjangaon and Hinjewadi briefs we can call within 24 hours and mobilise an engineer on site within the week.

Send a quick enquiry

We respond personally, within one working day.