ENGINEERED · COORDINATED · EXECUTED
From the HT incomer through LT distribution to the last lighting fixture and BMS sensor — electrical and ELV scope engineered, supplied and installed by one accountable team.
Electrical is the discipline most clients underestimate — and the one that audits, insurance assessments and uptime metrics judge most ruthlessly.
A well-engineered LT panel is invisible for fifteen years. A poorly engineered one announces itself with nuisance tripping and warranty claims no one wants to own. We design and build assuming a two-decade install life — with specifications, manufacturing partnerships and commissioning evidence that hold up to insurer audits.
Beyond power, our ELV scope covers structured cabling, BMS, access control and CCTV — integrated at the design stage with HVAC, fire and security.
What a typical electrical EPC scope covers
The electrical scope spans the highest-voltage equipment on site to the lowest-voltage sensor. We engineer it as one stack, not as four separate awards bolted together at handover.
Indoor and outdoor switchgear up to 33 kV, dry-type and oil-filled transformers, RMUs, VCBs — sized, specified and commissioned with relay coordination studies.
Main LT panels, MCCs, PCCs, sub-distribution boards. Built by vetted panel manufacturers to IS/IEC 61439 with documented type tests.
Power and control cabling, cable tray and ladder systems, busway distribution for high-current loads, transformer-to-LT-panel routes.
Photometric design for industrial and office spaces, perimeter and emergency lighting, DALI or addressable controls where the brief warrants it.
Equipotential bonding, plate / pipe / chemical earthing, mesh grids, downconductors and air terminations — per IS 3043 and IEC 62305.
Building management systems, CCTV with IP-camera networks, RFID/access control, structured cabling backbone, fire alarm interfaces.
Electrical compliance is what stands between you and a refused energisation certificate. We design and document to the standards your statutory inspector and your insurer will check.
Central Electricity Authority regulations and Indian Electricity Rules — the statutory baseline for any energisation in India.
LT panels and switchgear — type-tested assemblies with documented short-circuit ratings.
Earthing design and installation practice for buildings and industrial sites.
Lightning protection systems — risk assessment, design, installation and validation.
National Building Code — Building Services, the integrated MEPF compliance framework.
National Electrical Code — overall design framework for electrical installations in commercial and industrial premises.
Electrical complexity varies by sector — petrochemical needs ATEX-rated equipment, data centres need 2N redundancy, hospitals need essential / non-essential segregation. We engineer for the sector's actual constraints, not the catalogue.
HT/MV switchgear and transformers, LT distribution panels, lighting design, earthing and lightning protection, cable trays and busways, plus ELV systems — BMS, structured cabling, CCTV, access control and fire alarm interfaces.
Yes. Our electrical team handles statutory approvals including CEIG (Chief Electrical Inspectorate to Government) drawings, energisation certificates and local DISCOM coordination for project commissioning.
IS 3043 for earthing, IEC 60364 for installations, IS 8623 / IEC 61439 for switchgear assemblies, and BS 7671 reference where insurers require it. Documentation is provided in formats accepted by Indian statutory inspectors and global insurers.
Send the brief — load schedule, switchgear topology, ELV requirements, whatever you have. One conversation with the engineers who will deliver it.
We respond personally, within one working day.
